Asus P5ND2 SE, User Manual

Page: 45 / 100

ASUS P5ND2 SE 1-33
• For a fully configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or
later version) and provides a minimum power of 400 W.
• Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
11. ATX power connectors
(24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
P5ND2 SE
R
P5ND2 SE ATX Power Connector
+3 Vo lts
+3 Vo lts
Ground
+5 Vo lts
+5 Vo lts
Ground
Ground
Power O
+5V Standby
+12 Vo lts
‑5 V olts
+5 Vo lts
+3 Vo lts
‑12 Vo lts
Ground
Ground
Ground
PSON#
Ground
+5 Vo lts
+12 Vo lts
+3 Vo lts
+5 Vo lts
Ground
+12V DC
GND
+12V DC
GND
ATX12V
EATXPWR