Asus P5N-EM HDMI, User Manual

Page: 43 / 102

ASUS P5N-EM HDMI 1-31
7. ATX power connectors (24-pin EATXPWR and 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
• Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the
system will not boot.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
• Ensure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
• If you intent to use a PSU with 20-pin and 4-pin power plugs, ensure that
the 20-pin power plug can provide at least 15A on +12V and that the PSU
has a minimum power rating of 350 W. The system may become unstable
or may not boot up if the power is inadequate.
• You must install a PSU with a higher power rating if you intend to install
additional devices.
P5N-EMHDM
I
R
EATXPWR
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 V olts
-5 Volts
+5 Volts
+3 Volts
-12 V olts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 V olts
+3 Volts
+5 Volts
Ground
GND
+12V D C
GND
+12V D C
P5N-EM HDMI Front Panel Audio Connector
AT X12V