ASUS P5LD2-X/1333
-21
Advanced.Chipset.Settings
DRAM.Frequency.[Auto]
Allows you to set the frequency of DDR memory module.
Configuration options: [Auto] [400Mhz] [533Mhz]
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according to the
DRAM SPD (Serial Presence Detect). When disabled, you can manually set the
DRAM timing parameters through the DRAM sub-items. The following sub-items
appear when this item is Disabled.
Configuration options: [Disabled] [Enabled]
DRAM CAS# Latency [5 Clocks]
Controls the latency between the SDRAM read command and the time the
data actually becomes available.
Configuration options: [6 Clock] [5 Clocks] [4 Clocks] [3 Clocks]
DRAM RAS# Precharge [4 Clocks]
Controls the idle clocks after issuing a precharge command to the DDR
SDRAM. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks]
[5 Clocks] [6 Clocks]
DRAM RAS# to # Delay [4 Clocks]
Controls the latency between the DDR active command and the read/write
command. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks]
[6 Clocks]
4.4.3.
Chipset.
The menu allows you to change the advanced chipset settings. Select an item
then press <Enter> to display the sub-menu.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Advanced Chipset Settings
DRAM Frequency
[Auto]
Configure DRAM Timing by SPD [Enabled]
Hyper Path 3
[Auto]
DRAM Throttling Threshold [Auto]
Boot Graphic Adapter Priority
[PCI Express/PCI]
PEG Buffer Length
[Auto]
Link Latency
[Auto]
PEG Root Control
[Auto]
Slot Power
[Auto]
High Priority Port Select
[Disabled]
Manual DRAM Frequency
Setting or Auto by
SPD