Asus P5KPL-AM/PS User Manual Download Page 53

Page: 53 / 62

Chapter 2: BIOS setup

2-13

The Module Version and USB Devices Enabled items show the auto-detected values. If no

USB device is detected, the item shows None.

USB Functions [Enabled]

Allows you to disable or select the different values of the USB functions.

Configuration options: [Disabled] [Enabled]

USB 2.0 Controller [Enabled]

Allows you to enable or disable USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for USB devices on legacy operating systems

(OS). Setting to Auto allows the system to detect the presence of USB devices at startup.

If detected, the USB controller legacy mode is enabled. If no USB device is detected, the

legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12

Mbps). Configuration options: [FullSpeed] [HiSpeed]

2.4.3

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically

detects.

CPU Ratio Setting [Auto]

Sets the ratio between CPU Core Clock and the FSB frequency. Configuration option: [Auto]

2.4.2

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press <Enter> to display the configuration options.

C1É Support [Enabled]

Enable this item and users can configure the “Enhanced Halt State” function.

Configuration options: [Disabled] [Enabled]

Max CPUID Value Limit [Disabled]

Enable this item to boot legacy operating systems that cannot support CPUs with extended

CPUID functions. Configuration options: [Disabled] [Enabled]

Vanderpool Technology [Enabled]

Enable this item when the processor supports Vanderpool technology. Users need to reset

the computer to change the configuration of this item.

Configuration options: [Disabled] [Enabled]

• If an invalid ratio is set in CMOS then actual and set values may differ.
• Key in ratio numbers directly.

Summary of Contents for P5KPL-AM/PS































































Search results

Summary of Contents for P5KPL-AM/PS

Reviews:

Related manuals for P5KPL-AM/PS

Brands by name

Popular brands

Asus P5KPL-AM/PS, User Manual

Search results

Summary of Contents for P5KPL-AM/PS

Reviews:

Related manuals for P5KPL-AM/PS

Brands by name

Popular brands