background image

iv

Contents

Chapter2: BIOS setup

2.1  Managing and updating your BIOS ............................................2

2.1.1  Creating a bootable floppy disk

 ..................................2

2.1.2  ASUS EZ Flash utility ...................................................3
2.1.3  AFUDOS utility ............................................................4
2.1.4  ASUS CrashFree BIOS 2 utility ....................................6
2.1.5  ASUS Update utility ....................................................7

2.2  BIOS setup program ..................................................................9

2.2.1  BIOS menu screen .....................................................10
2.2.2  Menu bar ...................................................................10
2.2.3  Navigation keys .........................................................10
2.2.4  Menu items ...............................................................11
2.2.5  Sub-menu items ........................................................11

2.2.6  Configuration fields

 ...................................................11

2.2.7  Pop-up window ..........................................................11
2.2.8  Scroll bar ...................................................................11
2.2.9  General help ..............................................................11

2.3  Main menu ...............................................................................12

2.3.1  System Time [xx:xx:xx] ............................................12
2.3.2  System Date [Day xx/xx/xxxx].................................12

2.3.3  Legacy Diskette A [1.44M, 3.5 in.]

 ..........................12

2.3.4  Primary, Third and Fourth IDE Master/Slave .............13

2.3.5  IDE Configuration

 ......................................................14

2.3.6  System Information...................................................15

2.4  Advanced menu ......................................................................16

2.4.1  USB Configuration

 .....................................................16

2.4.2  CPU Configuration

 .....................................................17

2.4.3  Chipset ......................................................................18

2.4.4  Onboard Devices Configuration

 .................................19

2.4.5  PCI PnP ......................................................................21

2.5  Power menu ............................................................................22

2.5.1  Suspend Mode [Auto] ...............................................22
5.5.2  Repost Video on S3 Resume [No] ............................22
2.5.3  ACPI 2.0 Support [No] ..............................................22

Summary of Contents for P5GC-TVM SE











































































Reviews: