Asus P5G41T-M LX3 User Manual Download

Page: 51 / 60

ASUS P5G41T-M LX3

2-15

2.5

Power menu

The Power menu items allow you to change the settings for the Advanced Power

Management (APM). Select an item then press

<Enter> to display the configuration options.

Suspend Mode [Auto]

ACPI 2.0 Support

[Enabled]

ACPI APIC Support

[Enabled]

APM Configuration

Hardware Monitor

BIOS SETUP UTILITY

Main Advanced

Power

Boot Tools Exit

Select the ACPI state

used for System

Suspend.

2.5.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used

for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

2.5.2

ACPI 2.0 Support [Enabled]

Allows you to add more tables for Advanced Configuration and Power Interface (ACPI) 2.0

specifications. Configuration options: [Disabled] [Enabled]

2.5.3

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI)

support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI

APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled]

[Enabled]

Take caution when changing the settings of the PCI PnP menu items. Incorrect field values

can cause the system to malfunction.

Plug and Play O/S [No]

When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you

install a Plug and Play operating system, the operating system configures the Plug and Play

devices not required for boot. Configuration options: [No] [Yes]

2.4.6

PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA

devices, and setting the memory size block for legacy ISA devices.

Summary of Contents for P5G41T-M LX3





























































Search results

Summary of Contents for P5G41T-M LX3

Reviews:

Related manuals for P5G41T-M LX3

Brands by name

Popular brands

Asus P5G41T-M LX3, User Manual

Search results

Summary of Contents for P5G41T-M LX3

Reviews:

Related manuals for P5G41T-M LX3

Brands by name

Popular brands