ASUS P5G41-M SI
2-17
1.
Select the
Change User Password
item and press
<Enter>
.
2.
On the password box, key in a password containing up to six letters, or numbers, or
both, then press
<Enter>
.
3.
Confirm the password when prompted.
The message
Password Installed
appears after you set your password successfully.
To change the user password, follow the same steps in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to
[Setup]
, BIOS checks for user password when accessing the Setup utility. When
set to
[Always]
, BIOS checks for user password both when accessing Setup and booting the
system. Configuration options: [Setup] [Always]
2.7
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item then
press
<Enter>
to display the sub-menu.
ASUS EZ Flash 2
AI NET 2
Press ENTER to run the
utility to select and
update BIOS.
This utility supports
1. FAT 12/16/32 (r/w)
2. NTFS (read only)
3. CD-DISC (read only)
BIOS SETUP UTILITY
Main Advanced Power Boot
Tools
Exit
2.7.1
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press
<Enter>
, a confirmation message
appears. Use the left/right arrow key to select between
[Yes
] or
[No]
, then press
<Enter>
to
confirm your choice. Please see section 2.1.2 for details.
2.7.2
AI NET 2
Check Realtek LAN cable [Disabled]
Enables or disables checking of the Realtek LAN cable during the Power-On Self-Test
(POST). Configuration options: [Disabled] [Enabled]
Summary of Contents for P5G41-M SI
Page 1: ...Motherboard P5G41 M SI ...
