Asus P4S533-E User Manual Download Page 116

Page: 116 / 132

Chapter 5: Software reference

5.8

Winbond Voice Editor

The Winbond Voice Editor software allows you to customize the vocal
POST messages. Install the software from the software menu in the
support CD. See section “5.2.3 Software menu”.

Follow these steps to use the Winbond Voice Editor.

Launching the program

Launch the program either from the Winbond Voice Editor icon on your
desktop, or from the Windows Start menu,

Programs/Winbond Voice Editor/

Voice Editor

The Winbond Voice Editor screen appears.

Playing the default wave files

To play the default wave files, simply click on a POST event on the left
side of the screen, then click the Play button.

The default language setting is English.

To avoid conflicts, do not run the Winbond Voice Editor while running
the ASUS PC Probe.

Default Messages

POST Events

Summary of Contents for P4S533-E





































































































































Search results

Summary of Contents for P4S533-E

Reviews:

Asus P4S533-E, User Manual, Page: 116 / 132

Search results

Summary of Contents for P4S533-E

Reviews: