Asus P4S133 User Manual Download Page 13 | Manualshive

Page: 13 / 124

background image

ASUS P4S133 motherboard user guide

3

1.3

Special Features

Easy Overclocking

•

Quickly adjust CPU frequency multiples with BIOS in JumperFree

™

Mode

•

Adjustable FSB/MEM/PCI frequency ratio

•

Stepless Frequency Selection (SFS) for fine-tuning system bus frequency

from at 1MHz increments

•

Optimal system performance available with BIOS built-in Turbo Mode

•

Adjustable Vcore Voltage and VIO

•

Alternatively, easy-to-use DIP switches permit manual adjustment of the

processor external/internal frequency settings

Digital Audio: On audio models, a digital audio connector is onboard to

accommodate the Sony/Philips Digital Interface (S/PDIF) Out module,
which supports coaxial and fiber interfaces. Experience 5.1-channel
surround sound and enhanced 3D audio while playing DVDs and computer
games.

Smart Card Reader Support: A special connector for the Smart Card Reader

comes onboard to support the cutting-edge technology for increased
security in authenticating online transactions, editing IC-based information.

Temperature, Fan and Voltage Monitoring: CPU temperature is monitored

by the ASUS ASIC through the CPU’s internal thermal diode to prevent
overheating and damage. All system fans are monitored for RPM and
failure. System voltage levels are monitored to ensure stable voltage to
critical motherboard components.

ACPI Ready: Advanced Configuration Power Interface (ACPI) provides more

Energy Saving Features for operating systems that support OS Direct
Power Management (OSPM).

Onboard LAN (Optional): The motherboard incorporates the Realtek PHY

RTL8201 chip to support 10BASE-T/100BASE-TX Fast Ethernet
networking.

Auto Fan Off: The system fans powers off automatically even in sleep mode.

Dual Function Power Button: Push the power button for less than 4 seconds

when the system is operating places the system into sleep or soft-off
modes, depending on the BIOS or OS setting. If the power button is
pressed for more than 4 seconds, the system enters the soft-off mode
regardless of the BIOS setting.

«
...
11
12
13
14
15
...
»

Summary of Contents for P4S133





























































































































Reviews:

No comments

Related manuals for P4S133

Brand: Gigabyte Pages: 93

Brand: ST Pages: 11

Brand: Texas Instruments Pages: 9

Brand: Gigabyte Pages: 2

Brand: Linear Technology Pages: 8

Brand: SOLTEK Pages: 94

Brand: Evalue Technology Pages: 91

Brand: Rohm Pages: 8

P67 TRANSFORMER -

Brand: ASROCK Pages: 61

Brand: SOYO Pages: 22

Brand: Asus Pages: 28

DSBF-D12 - Motherboard - SSI EEB 3.61

Brand: Asus Pages: 1

Brand: Asus Pages: 62

Brand: Asus Pages: 96

Brand: Asus Pages: 104

Brand: Asus Pages: 110

Brand: Asus Pages: 112

Brand: Asus Pages: 128

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands