manualshive.com logo in svg

Asus P4C800-E Deluxe, User Manual, Page: 24 / 149

Share
Download
Asus P4C800-E Deluxe User Manual Download Page 24

1-10

Chapter 1: Product introduction

PCI slots. These five 32-bit PCI 2.2 expansion slots support bus
master PCI cards like SCSI or LAN cards with 133MB/s maximum
throughput.

Audio CODEC. The AD1985 AC ‘97 2.3 stereo audio CODEC provides
a 6-channel audio capability. The CODEC supports surround sound
output, variable sample rate conversion, analog enumeration
capability, and other major audio technologies for a complete
integrated audio solution.

Gigabit LAN controller. The Intel

®

 82547EI Gigabit Ethernet controller

allows full-duplex Gigabit performance on LAN on Motherboard (LOM)
applications through the Communication Streaming Architecture
(CSA). The controller combines Intel’s fifth-generation Gigabit MAC
design integrated with physical layer circuitry (PHY) to support
1000BASE-T, 100BASE-TX, and 10BASE-T applications.

PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.

Parallel port. This 25-pin port connects a parallel printer, a scanner, or
other devices.

IEEE 1394 port. This port connects IEEE 1394-compliant devices like
camcorders, VCRs, printers, or digital cameras. 

(on 1394 models only)

RJ-45 port. This port allows connection to a Local Area Network (LAN)
through a network hub.

Line In jack. This Line In (light blue) jack connects a tape player or other
audio sources. In 6-channel mode, the function of this jack becomes
Rear Speaker Out.

Line Out jack. This Line Out (lime) jack connects a headphone or a
speaker. In 6-channel mode, the function of this jack becomes Front
Speaker Out.

Microphone jack. This Mic (pink) jack connects a microphone. In
6-channel mode, the function of this jack becomes Bass/Center.

USB 2.0 ports 3 and 4. These 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.

USB 2.0 ports 1 and 2. These 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.

Serial port. This 9-pin COM1 port is for pointing devices or other serial
devices.

S/PDIF out port. This connector supports S/PDIF devices that
provides 5.1-channel surround sound and 3D audio.

PS/2 keyboard port. This purple connector is for a PS/2 keyboard.

22

23

24

25

26

27

28

29

30

21

31

32

33

34

20

Summary of Contents for P4C800-E Deluxe






















































































































































Reviews:

No comments