manualshive.com logo in svg

Asus P4BGL-ED, User Manual, Page: 12 / 70

Share
Download
Asus P4BGL-ED User Manual Download Page 12

1-4

Chapter 1:  Motherboard Information

11

ATX 12V connector. This power connector connects the 4-pin 12V
plug from the ATX 12V power supply.

CPU Sockets. A 478-pin surface mount, Zero Insertion Force (ZIF)
socket for the Intel

® 

 Pentium

®

 4 478/Northwood Processor with

533/400 MHz system bus that allows 4.3 GB/s and 3.2 GB/s data
transfer rates respectively.

NorthBridge Controller. This Intel Brookdale G/GL i845G/GL
controller integrates a high performance host interface for the Intel

®

Pentium

® 

 4 processor, a memory controller and an integrated

graphics interface.

DDR DIMM Sockets. These two 184-pin DIMM sockets support up
to 2GB using non-ECC PC2100/1600 DDR SDRAM DIMMs with
2.1GBytes/sec of transfer rate.

Super I/O chipset. This interface provides the commonly used
Super I/O functionality. The chipset supports a high-performance
floppy disk controller for a 360K/720K/1.44M/2.88M floppy disk
drive, a PS/2 keyboard and mouse port, a multi-mode parallel port,
a game port and, a serial port.

Flash ROM. This 2MB firmware contains the programmable BIOS
program.

IDE Connectors. These dual-channel bus master IDE connectors
support up to four Ultra DMA133/100/66, PIO Modes 3 & 4 IDE
devices. Both the primary(blue) and secondary(black) connectors
are slotted to prevent incorrect insertion of the IDE ribbon cable.

Floppy Disk connector. This connector connects the provided
ribbon cable for the floppy disk drive. One side of the connector is
slotted to prevent incorrect insertion of the floppy disk cable.

ATX power connector. This standard 20-pin connector connects to
an ATX 12V power supply. The power supply must have at least 1A
on the +5V standby lead (+5VSB).

South bridge controller. This Intel ICH4 FW82801DB controller
integrates the AC’97 Interface, four Universal Serial Bus Host
controllers, two IDE Master/Slave controllers, the ITE 8708F Super
I/O, Flash BIOS, and  PCI bus for two PCI Slots.

PCI slot. This 32-bit PCI 2.2 expansion slot supports bus master
PCI cards like SCSI or LAN cards with 133MB/s maximum output.

10

1

2

3

4

5

6

7

8

9

Summary of Contents for P4BGL-ED







































































Reviews:

No comments