manualshive.com logo in svg

Asus P4B533-E, User Manual, Page: 139 / 148

Share
Download
Asus P4B533-E User Manual Download Page 139

ASUS P4B533-E motherboard user guide

5-27

5.4.2 Enter the MBFastBuild™ utility

1. Boot the system.

If this is the first time you boot the system with the new hard disks
installed  and connected to the ATAIDE connectors on the
motherboard, the MBFastTrak133 Lite™ BIOS displays the following:

2. Press <Ctrl-F> simultaneously to display the FastBuild™ utility main

menu.

MBFastBuild (tm) Utility 1.21 (c) 1996-2001 Promise Technology, Inc.

Auto Setup . . . . . . . . . . 

[ 1 ]

[ 1 ]

View Drive Assignments . . . . [ 2 ]

[ 2 ]

View Array . . . . . . . . . . [ 3 ]

[ 3 ]

Delete Array . . . . . . . . . [ 4 ]

[ 4 ]

Rebuild Array. . . . . . . . . [ 5 ]

[ 5 ]

Controller Configuration . . . [ 6 ]

[ 6 ]

Press 1..6 to select Option                           [ESC] Exit

[ Main Menu ]

[ Keys Available ]

MBFastTrak (tm) “Lite” BIOS version 2.00.0.20

(c)1995-2001 Promise Technology, Inc. All Rights Reserved.

   No Array defined...

Press <Ctrl-F> to enter FastBuild (tm) Utility

Or press <ESC> key to continue booting.

Summary of Contents for P4B533-E





















































































































































Reviews:

No comments