Asus P4B-MX User Manual Download Page 17

Page: 17 / 112

ASUS P4B-MX motherboard user guide

1-5

Game/MIDI connector. This connector supports a joystick or a
game pad for playing games, and MIDI devices for playing or
editing audio files.

Serial ports. These two 9-pin COM1/COM2 ports are for pointing
devices or other serial devices.

Parallel port. This 25-pin port connects a parallel printer, a
scanner, or other devices.

PS/2 keyboard port. This purple 6-pin connector is for a PS/2
keyboard.

PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.

Figure 1-2

Pre-installed Heatsink Retention Module Base

This motherboard is shipped with the heatsink retention module base
already installed. This module should fit the retention mechanism that
comes with a boxed CPU.

You do not have to remove the retention module base when installing
the CPU or installing other motherboard components.

1.3.2 Pre-installed accessory

Retention Module Base

Summary of Contents for P4B-MX

















































































































Search results

Summary of Contents for P4B-MX

Reviews:

Related manuals for P4B-MX

Brands by name

Popular brands

Asus P4B-MX, User Manual

Search results

Summary of Contents for P4B-MX

Reviews:

Related manuals for P4B-MX

Brands by name

Popular brands