manualshive.com logo in svg

Asus P4B-LS, User Manual, Page: 101 / 126

Share
Download
Asus P4B-LS User Manual Download Page 101

ASUS P4B-LS motherboard user guide

5-3

5.2.3 Software menu

The software menu shows the applications and other software that the
motherboard supports. The highlighted items indicate that they are
available for your motherboard. Simply click on a specific item then follow
the installation wizard to install it.

The software menu is composed of two screens. Click on the 

Next 

button

on the lower right corner of the first screen to display the second menu
screen. To return to the first menu screen, click on the 

Back 

button on the

lower right corner of the second screen.

ASUS Update

This program allows you to download the latest version of the BIOS from
the ASUS website.

Before using the ASUS Update, make sure that you have an Internet
connection so you can connect to the ASUS website.

Intel

®

 LDCM Administrator Setup

This program is for monitoring PC systems on the network within the same
bridge as the installed Client software.

The administrator should install both the Administrator and the Client
software.

Intel

®

 LDCM Client Setup

This program is for monitoring the Client system. Install the LANDesk
Client Manager to use the hardware manager features.

Summary of Contents for P4B-LS































































































































Reviews:

No comments