18
ASUS P3C2000 User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches (DSW) must be set to OFF.
Setting
JEN
Enable (JumperFree)
[2-3] (default)
Disable (Jumper)
[1-2]
P3C2000 JumperFree™ Mode Setting
Jumper
JumperFree
(Default)
1 2 3
1 2 3
JEN
P3C2000
®
JP5
3
0
2) USB Device Wake Up (3-pin JP1)
This allows you to disable or enable the USB device power up function. Set this
jumper to Enable if you wish to use your USB device to wake up your computer.
This feature requires an ATX power supply that can supply at least 2A on the
+5VSB lead. The default is set to Disable because not all computers have the
appropriate ATX power supply. Your computer will not power ON if you set this
to Enable and do not have the appropriate ATX power supply. NOTE: This
jumper must be set in conjunction with Wake On USB Device in 4.5.1 Power Up
Control (4. BIOS SETUP).
NOTE: For suspend to RAM function, this jumper must be set to Enable.
P3C2000 USB Device Wake Up
+5V
(Default)
+5VSB
(Enable USB
Device Wake Up)
1
2
3
1
2
3
JP1
P3C2000
®
3
0
