Asus P3B, E-Manual

Page: 65 / 76

LED projector E-Manual
65
Using ASUS WiFi Projection
Using this mode, you can establish a connection between your input
device and your LED projector.
1. Connect the Wi-Fi dongle to your LED projector to launch the
Media Center
2. Select ASUS WiFi Projection.
NOTE:
If the Media Center does not automatically launch, press
then select
WiFi>ASUS WiFi Projection.
3. Enable the WiFi connection in your input device. Select
ASUS-
P3B
(default SSID) or the new SSID you configured for the P3B
LED projector.
NOTE:
You may also refer to the steps presented onscreen.
4. Type the password on your input device as shown on the LED
projector to enable the connection.