manualshive.com logo in svg

Asus P2V-B, User Manual

Share
Download
Asus P2V-B User Manual Download Page 71

ASUS P2V-B User’s Manual

71

Install Chipset Patch and VGARTD Driver

Insert the Support CD that came with your motherboard into your CD-ROM drive
or double-click the CD drive icon in My Computer to bring up the setup screen.

1.

 

  Click here.

V. SOFTWARE SETUP

V

.  S/W SETUP

Windows 98

2.

 

  Click here.

3. Select the components you

want installed and then
click here.

*4. Select your preferences and

then click here.

*5. Select your preferences and

then click here.

*6. Select your preferences and

then click here.

7. Click here and then

click Finish to restart.

*These steps may or may not appear depend-
ing on the components you selected in step 3.

NOTE: The Chipset Patch is only for Win-
dows 95. The VGARTD driver is for AGP
display cards only. This driver is not neces-
sary for PCI cards in Windows 98, which in-
stalls its default driver. See section on P2V-B
Support CD for other information.

Summary of Contents for P2V-B

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands