Asus P1-P5945G User Manual Download Page 12

Page: 12 / 92

1-2

Chapter 1: System introduction

1.1

Welcome!

Thank you for choosing the ASUS P1/P2-P5945GC!
The ASUS P1/P2-P5945GC is an all-in-one barebone system with a versatile

home entertainment feature.
The system comes in a stylish mini-tower casing and powered by the ASUS

motherboard that supports the Intel

Pentium

D, Intel

Pentium

4, Intel

Conroe

or Intel

Celeron

processor in the 775-land package.

The system supports up to 4 GB of system memory using

DDR2-667/533/400 DIMMs, high-resolution graphics via integrated

graphics controller, Serial ATA, USB 2.0, and 8-channel audio features the

system takes you ahead in the world of power computing.

1.2

Front panel

The front panel includes the optical drive bays, power button, and several

I/O ports are located at the front panel.

Summary of Contents for P1-P5945G





























































































Search results

Summary of Contents for P1-P5945G

Reviews:

Brands by name

Popular brands

Asus P1-P5945G, User Manual

Search results

Summary of Contents for P1-P5945G

Reviews:

Brands by name

Popular brands