P/I-P6NP5 User's Manual
33
IV. BIOS SOFTWARE
IV
. BIOS
(Standard CMOS)
Drive A / Drive B (None)
These fields record the types of floppy disk drives installed in your system. The
available options for drives A and B are: 360KB, 5.25 in.; 1.2MB, 5.25 in.; 720KB,
3.5 in.; 1.44MB, 3.5 in.; 2.88MB, 3.5 in.; None
To enter the configuration value for a particular drive, highlight its corresponding
field and then select the drive type using the left- or right-arrow key.
Floppy 3 Mode Support (Disabled)
This is the Japanese standard floppy drive. The standard stores 1.2MB in a 3.5"
diskette. This is normally disabled but you may choose from either: Drive A, Drive
B, Both, and Disabled
Video (EGA/VGA)
Set this field to the type of video display card installed in your system. The options
are: EGA/VGA, Mono (for Hercules or MDA), CGA 40, and CGA 80
If you are using a VGA or any higher resolution card, choose the “EGA/VGA”
option.
Halt On (All Errors)
This field determines which types of errors will cause the system to halt. Choose
from : All Errors, No Errors, All, But Keyboard, All, But Diskette, and All, But Disk/
Key
Summary of Contents for P I-P6NP5
