manualshive.com logo in svg

Asus NCLV-D, User Manual, Page: 92 / 104

Share
Download
Asus NCLV-D User Manual Download Page 92

4 - 2 6

4 - 2 6

4 - 2 6

4 - 2 6

4 - 2 6

C h a p t e r   4 :   B I O S   s e t u p

C h a p t e r   4 :   B I O S   s e t u p

C h a p t e r   4 :   B I O S   s e t u p

C h a p t e r   4 :   B I O S   s e t u p

C h a p t e r   4 :   B I O S   s e t u p

4.5

Power menu

The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM) features. Select an item then press
<Enter> to display the configuration options.

4.5.1

4.5.1

4.5.1

4.5.1

4.5.1

ACPI APIC Support [Enabled]

ACPI APIC Support [Enabled]

ACPI APIC Support [Enabled]

ACPI APIC Support [Enabled]

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Application-Specific Integrated Circuit
(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]

Do not change the ACPI APIC support after you have installed the
operating system (OS), otherwise, a boot failure may occur.

ACPI APIC Support

[Enabled]

APM Configuration
Hardware Monitor

Select the ACPI state
used for System
Suspend.

Summary of Contents for NCLV-D









































































































Reviews:

No comments