Asus Motherboard M2NPV-MX, User Manual

Page: 50 / 96

2 - 6 2 - 6
2 - 6 2 - 6 2 - 6
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
To update the BIOS using EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS
file for the motherboard.
2. Save the BIOS file to a floppy disk, then restart the system.
3. You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk/USB flash disk that contains the BIOS file to
the floppy disk drive or the USB port.
2.1.3 2.1.3
2.1.3 2.1.3
2.1.3 ASUS EZ Flash 2 utility ASUS EZ Flash 2 utility
ASUS EZ Flash 2 utility ASUS EZ Flash 2 utility
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having
to go through the long process of booting from a floppy disk and using a
DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is
accessible by pressing <Alt> + <F2> during the Power-On Self Tests
(POST).
• This function can support devices such as USB flash disk, hard disk,
or floppy disk with F A T 3 2 / 1 6 / 1 2
F A T 3 2 / 1 6 / 1 2 F A T 3 2 / 1 6 / 1 2 F A T 3 2 / 1 6 / 1 2 F A T 3 2 / 1 6 / 1 2 format only.
• Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
ASUSTek EZ Flash 2 BIOS ROM Utility B312
Current ROM Update ROM
BOARD: M2NPVMX
VER: 0122
DATE: 04/24/2006 BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: C:\M2NPVOC
A:
C:
[Enter] Select [S] Save [ESC]Exit
[Tab]Switch [Up/Down/Home/End] Move
WIN98E <DIR>
NETTERM <DIR>
DRIVERS <DIR>
RECYCLED <DIR>
WUTEMP <DIR>
NEWFOL~1 <DIR>
INSTALL <DIR>
TEST-REB <DIR>
MSDOWNLD.TMP <DIR>
Note
(2) Enter BIOS setup program. Go to the T o o l s T o o l s T o o l s T o o l s T o o l s menu to select E Z E Z E Z E Z E Z
F l a s h 2 F l a s h 2 F l a s h 2 F l a s h 2 F l a s h 2 and press <Enter> to enable it.
You can switch between drives by pressing <Tab> before the
correct file is found. Then press <Enter>.
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS
update process and automatically reboots the system when down.
Press <Alt> + <F2> during POST to display the following.
FLASH TYPE: Winbond W39V080A 4Mb LPC
WIN98E <DIR>