Asus MEW, User Manual

Page: 35 / 120

ASUS MEW User’s Manual 35
3. HARDWARE SETUP
Connectors
3. H/W SETUP
16) Internal Audio Connectors (4-pin VIDEO, AUX, CD, TAD)
These connectors allow you to receive stereo audio input from such sound sources
as a CD-ROM, TV tuner, or MPEG card. The TAD connector allows the on-
board audio to interface with a voice modem card with a similar connector. It
also allows the sharing of mono_in (such as a phone) and mono_out (such as a
speaker) between the onboard audio and the voice modem card.
MEW Internal Audio Connectors
TAD In/Out
Modem-Out (from Modem)
Ground
Modem-In (to Modem)
CD In (Black)
Right Audio Channel
Left Audio Channel
Ground
AUX In (White)
Right Audio Channel
Left Audio Channel
Ground
VIDEO In (Green)
Right Audio Channel
Left Audio Channel
Ground
01 01 01
R
MEW
17) Internal Speaker Connector (INT_SPKA)
This connector allows you to connect the internal chassis speaker to the onboard
audio’s output. This will allow you to use the chassis’ built-in speaker to listen to
sounds normally requiring separately purchased external speakers. The ground
(GND) wire is usually the black wire and the speaker-out (SPKOUT) is usually
the red wire. System beeps and warnings sent through the chassis speaker con-
nector is also routed through the INT_SPKA so that two speakers are not needed.
MEW Internal Speaker Connector
INT_SPKA
01 01 01
®
MEW
SPKOUT
GND
1
4