manualshive.com logo in svg

Asus MEW-AM, User Manual, Page: 21 / 80

Share
Download
Asus MEW-AM User Manual Download Page 21

ASUS MEW-AML User’s Manual

21

6) Monitor Output Connector (Blue 15-pin VGA)

This connector is for output to a VGA-compatible device.

VGA Monitor (15-pin Female)

7) Joystick/MIDI Connector (Gold 15-pin GAME_AUDIO) (optional)

You may connect game joysticks or game pads to this connector for playing
games. Connect MIDI devices for playing or editing professional audio.

Joystick/Midi (15-pin Female)

NOTE: The onboard game port is to be used only if you are not using any PCI
or ISA audio card with a game port.

8) Audio Port Connectors  (Three 1/8” GAME_AUDIO) (optional)

Line Out (lime) can be connected to headphones or preferably powered speak-
ers. Line In (light blue) allows tape players or other audio sources to be re-
corded by your computer or played through the Line Out (lime). Mic (pink)
allows microphones to be connected for inputting voice.

Mic

Line In

Line Out

1/8" Stereo Audio Connectors

3.  HARDWARE SETUP

Connectors

3. H/W SETUP

Summary of Contents for MEW-AM

















































































Reviews:

No comments