ASUS M4N78 SE
2-19
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.
Select the
Change User Password
item and press
<Enter>
.
2.
On the password box that appears, type a password composed of at most six letters
and/or numbers, then press
<Enter>
.
3.
Confirm the password when prompted.
The message “Password Installed” appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to
[Setup]
, BIOS checks for user password when accessing the Setup utility. When
set to
[Always]
, BIOS checks for user password both when accessing Setup and booting the
system. Configuration options: [Setup] [Always]
2.7
Tools menu
2.7.1
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press
<OK>
, a confirmation message
appears. Use the left/right arrow key to select between
[Yes]
or
[No]
, then press
<OK>
to
confirm your choice.
Select Screen
Select Item
+- Change Field
Enter Go to Sub
Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
ASUS EZ Flash 2
Express Gate
[Auto]
Enter OS Timer
[10 Seconds]
Reset User Data
[No]
AI NET2
Press ENTER to run
the utility to select
and update BIOS.
This utility doesn't
support :
1.NTFS format
BIOS SETUP UTILITY
Main Advanced Power Boot
Tools
Exit
Summary of Contents for M4N78 SE
Page 1: ...Motherboard M4N78 SE ...
