manualshive.com logo in svg

Asus M4N75TD, User Manual, Page: 35 / 78

Share
Download
Asus M4N75TD User Manual Download Page 35

1.12.2 

Internal connectors

1. 

IDE connector (40-1 pin PRI_IDE)

The onboard IDE connector is for Ultra DMA 133/100/66 signal cable. There are three 

connectors on each Ultra DMA 133 / 100 / 66 signal cable: blue, black, and gray. 

Connect the blue connector to the motherboard’s IDE connector, then select one of the 

following modes to configure your devices:

Drive jumper setting

Mode of device(s)

Cable connector

Single device

Cable-Select or Master

-

Black

Two devices

Cable-Select

Master

Black

Slave

Gray

Master

Master

Black or gray

Slave

Slave

•  Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA 

cable connector. This prevents incorrect insertion when you connect the IDE cable.

•  Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices.

If any device jumper is set as “Cable-Select”, ensure that all other device jumpers have the 

same setting.

Chapter 1: Product introduction

1-23

Summary of Contents for M4N75TD















































































Reviews:

No comments