manualshive.com logo in svg

Asus M4A78T-E - Motherboard - ATX, User Manual, Page: 64 / 122

Share
Download
Asus M4A78T-E - Motherboard - ATX User Manual Download Page 64

3-6

Chapter 3: BIOS setup

Chapter 3

3.2.4 

ASUS CrashFree BIOS 2 utility

The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file 

when it fails or gets corrupted during the updating process. You can update a corrupted BIOS 

file using the motherboard support DVD or the floppy disk that contains the updated BIOS file.

Prepare the motherboard support DVD or the floppy disk containing the updated 

motherboard BIOS before using this utility.

Recovering the BIOS

To recover the BIOS:
1. 

Turn on the system.

2. 

Insert the floppy disk or support DVD containing BIOS file to the floppy disk or optical 

drive.

3. 

The utility displays the following message and automatically checks the floppy disk or 

support DVD for the BIOS file.

4. 

Restart the system after the utility completes the updating process.

 

When found, the utility reads the BIOS file and starts flashing the corrupted BIOS file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

Floppy found!

Reading file “M4a79tdlx.ROM”. Completed.
Start flashing...

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause 

system boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. 

Select the 

Load Setup Defaults

 item under the Exit menu. See section 

3.10 Exit Menu

 for 

details.

Summary of Contents for M4A78T-E - Motherboard - ATX



























































































































Reviews:

No comments