Asus M4A78LT-M PLUS User Manual Download Page 12

Page: 12 / 64

HyperTransport™ 3.0 support

HyperTransport™ 3.0 technology provides 2.6 times more bandwidth

than HT1.0 that radically improves system efficiency for a smoother and

faster computing environment.

AMD

Cool ‘n’ Quiet Technology

This motherboard supports the AMD

Cool ‘n’ Quiet technology which

monitors system operation and automatically adjusts CPU voltage and

frequency for a cool and quiet operating environment.

Dual-Channel DDR3 1800 (O.C.) support

This motherboard supports DDR3 memory that features data transfer

rates of 1800 (O.C.)/1600 (O.C.)/1333/1066 MHz to meet the higher

bandwidth requirements of the latest operating system, 3D graphics,

multimedia, and Internet applications.

Hybrid CrossFireX™ support

ATI Hybrid CrossFireX™ technology greatly boosts graphics performance

with an onboard GPU and a discrete GPU.

• Hybrid CrossFireX™ is supported by Windows

Vista / 7 OS only.

• Refer to www.amd.com for the discrete GPUs that support Hybrid CrossFireX™.

DVI support

DVI (Digital Visual Interface) provides high visual quality of digital display

devices such as LCD monitor. The interface of this motherboard supports

dual VGA output both DVI and RGB and is HDCP compliant allowing

playback of HD DVD, Blu-ray disc, and other protected content.

Gigabit LAN solution

The onboard LAN controller is a highly integrated Gb LAN controller. It is

enhanced with an ACPI management function to provide efficient power

management for advanced operating systems.

Serial ATA 3Gb/s technology and RAID support

This motherboard supports hard drives based on the Serial ATA (SATA)

3Gb/s storage specification, delivering enhanced scalability and doubling

the bus bandwidth for high-speed data retrieval and save. It also supports

RAID 0, RAID 1, and RAID 0+1 configurations for Serial ATA hard drives.

100% All High-quality Conductive Polymer Capacitors

This motherboard uses all high-quality conductive polymer capacitors for

durability, improved lifespan, and enhanced thermal capacity.

Chapter 1: Product introduction

1-2

Summary of Contents for M4A78LT-M PLUS

































































Search results

Summary of Contents for M4A78LT-M PLUS

Reviews:

Related manuals for M4A78LT-M PLUS

Brands by name

Popular brands

Asus M4A78LT-M PLUS, User Manual

Search results

Summary of Contents for M4A78LT-M PLUS

Reviews:

Related manuals for M4A78LT-M PLUS

Brands by name

Popular brands