background image

ii

E5248
First Edition V1 

December 2009

Copyright © 2009 ASUSTeK Computer Inc. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, 

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any 

means, except documentation kept by the purchaser for backup purposes, without the express written 

permission of ASUSTeK Computer Inc. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless 

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the 

product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS 

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS 

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, 

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, 

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), 

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY 

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR 

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, 

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO 

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS 

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or 

copyrights of their respective companies, and are used only for identification or explanation and to the 

owners’ benefit, without intent to infringe. 

Offer to Provide Source Code of Certain Software

This product may contain copyrighted software that is licensed under the General Public License (“GPL”) 

and under the Lesser General Public License Version (“LGPL”). The GPL and LGPL licensed code in this 

product is distributed without any warranty. Copies of these licenses are included in this product.

You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software, 

and/or the complete corresponding source code of the LGPL Software (with the complete machine-

readable “work that uses the Library”) for a period of three years after our last shipment of the product 

including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either

(1) for free by downloading it from http://support.asus.com/download;

 

or 

(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location 

where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc. 

Legal Compliance Dept. 

15 Li Te Rd., 

Beitou, Taipei 112 

Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the 

product for which you wish to obtain the corresponding source code and your contact details so that we 

can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as 

the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source 

Software licenses. If however you encounter any problems in obtaining the full corresponding source code 

we would be much obliged if you give us a notification to the email address [email protected], stating the 

product and describing the problem (please do NOT send large attachments such as source code archives 

etc to this email address).

Summary of Contents for M4A77T





























































Reviews: