Asus M3N-HT - Deluxe/HDMI Motherboard - ATX User Manual Download Page 18

Page: 18 / 178

1-2

Chapter 1: Product Introduction

1.3

Special features

1.3.1

Product highlights

Green ASUS

This motherboard and its packaging comply with the �uropean Union’s Restriction

on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision

of creating environment-friendly and recyclable products/packaging to safeguard

consumers’ health while minimizing the impact on the environment.

AMD

Socket AM2+ Phenom™ FX / Phenom /

Athlon™ / Sempron™ CPU support

This motherboard supports AMD

AMD

Socket AM2+ multi-core processors with

unique L3 cache and delivers better overclocking capabilities with less power

consumption. It features dual-channel DDR2 1066 memory support and

accelerates data transfer rate up to 5200MT/s via HyperTransport™ 3.0 based

system bus. See page 2-6 for details.

HyperTransport™ 3.0 support

HyperTransport™ 3.0 technology provides 2.6 times more bandwidth than

HyperTransport™ 1.0, radically improving system efficiency to create a smoother,

faster computing environment.

AMD

Socket AM2 Athlon™ 64 X2 / Athlon™

Athlon™

64 FX / Athlon™ 64 / Sempron™ CPU support

This motherboard supports AMD

AMD

Socket AM2 single-core Athlon™ 64 /

Sempron™ and dual-core Athlon™ 64 X2 / Athlon™ 64 FX processors with 2MB

/ 1MB / 512KB L2 cache based on 64-bit architecture. It features 2000 / 1600

MT/s HyperTransport™-based system bus, dual-channel un-buffered DDR2 800

memory support, and AMD

Cool ‘n’ Quiet™ Technology. See page 2�6 for details.

NVIDIA

nForce

780a SLI chipset

The NVIDIA

nForce 780a SLI chipset supports the NVIDIA

Scalable Link

Interface (SLI™) technology that allows three graphics processing units (GPUs)

in a single system. It’s designed for enthusiast, extreme overclocking capability,

ultimate gaming performance with SLI technology support. It’s definitely one of the

fastest platform in the world. The NVIDIA

nForce 780a SLI chipset also supports

six (6) Serial ATA 3 Gb/s devices, PCI Express™ x16 slots with NVIDIA

SLI

™

support at dual x16 mode or at tripple x8 mode, and up to 10 USB 2.0 ports.

Summary of Contents for M3N-HT - Deluxe/HDMI Motherboard - ATX



















































































































































































Search results

Summary of Contents for M3N-HT - Deluxe/HDMI Motherboard - ATX

Reviews:

Related manuals for M3N-HT - Deluxe/HDMI Motherboard - ATX

Brands by name

Popular brands

Asus M3N-HT - Deluxe/HDMI Motherboard - ATX, User Manual

Search results

Summary of Contents for M3N-HT - Deluxe/HDMI Motherboard - ATX

Reviews:

Related manuals for M3N-HT - Deluxe/HDMI Motherboard - ATX

Brands by name

Popular brands