background image

x

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the following 

symbols used throughout this manual.

Typography

Bold text 

Indicates a menu or an item to select.

Italics

 

Used to emphasize a word or a phrase.

<Key>    

Keys enclosed in the less-than and greater-than sign 

means that you must press the enclosed key.  

 

Example: <Enter> means that you must press the 

Enter or Return key.

<Key1+Key2+Key3> 

If you must press two or more keys simultaneously, the 

key names are linked with a plus sign (+).  

 

Example: <Ctrl+Alt+D>

Command

 

Means that you must type the command exactly as 

shown, then supply the required item or value enclosed 

in brackets. 

 

 

 

Example: At the DOS prompt, type the command line:

 

afudos� ��

 ��

M3N-HD.ROM

 

 

DANGER/WARNING:

 Information to prevent injury to yourself  

 

when trying to complete a task. 

 

 

CAUTION:

 Information to prevent damage to the components  

 

when trying to complete a task. 

 

 

NOTE

: Tips and additional information to help you complete a  

 

task.

 

 

IMPORTANT

: Instructions that you MUST follow to complete a  

 

task.

Summary of Contents for M3N-HD





































































































































































Reviews: