manualshive.com logo in svg

Asus M2NS-NVM, Manual

Share
Download
Asus M2NS-NVM Manual Download Page 53

ASUS MNS-NVM

-1

Capacity

Displays the auto-detected hard disk capacity. This item is not configurable. 

Cylinder

Shows the number of the hard disk cylinders. This item is not configurable. 

Head

Shows the number of the hard disk read/write heads. This item is not configurable. 

Sector

Shows the number of sectors per track. This item is not configurable.

Transfer Mode

Shows the Transfer mode. This item is not configurable.

Access Mode [Auto]

The default [Auto] allows automatic detection of an IDE hard disk drive. 

Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual]. 

Configuration options: [CHS] [LBA] [Large] [Auto]

Before attempting to configure a hard disk drive, make sure you have the 

correct configuration information supplied by the drive manufacturer. Incorrect 

settings may cause the system to fail to recognize the installed hard disk.

After entering the IDE hard disk drive information into BIOS, use a disk utility, 

such as FDISK, to partition and format new IDE hard disk drives. This is 

necessary so that you can write or read data from the hard disk. Make sure to 

set the partition of the Primary IDE hard disk drives to active.

Summary of Contents for M2NS-NVM









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands