manualshive.com logo in svg

Asus M2N68 AM - Motherboard - Micro ATX, User Manual, Page: 12 / 62

Share
Download
Asus M2N68 AM - Motherboard - Micro ATX User Manual Download Page 12

DDR2 1066 is for AM2+ only.

64-bit CPU support  

64-bit computing, the technology to replace 32-bit architecture, 

delivers advanced system performance, faster memory access 

and increased productivity. This motherboard provides excellent 

compatibility and flexibility by supporting either 64-bit or 32-bit 

architecture.

NVIDIA

®

 GeForce™ 7025 / nForce™ 630a 

The NVIDIA

®

 GeForce™ 7025 integrates NVIDIA

®

 GeForce™ 

7 Series Shader model 3.0 DirectX 9.0 graphics processor. The 

NVIDIA

®

 nForce™ 630a MCP delivers NVIDIA

®

 Gigabit LAN, and 

NVIDIA

®

 MediaShield storage management technology allowing easy 

RAID configuration (RAID 0, RAID 1 ,RAID 10 ,RAID 5, and JBOD) for 

Serial ATA 3Gb/s.

USB 2.0 technology

USB 2.0 is the latest connectivity standard for next generation 

components and peripherals. Backwards compatible with current USB 

1.1 peripherals, USB 2.0 delivers transfer speeds up to 40 times faster 

at 480Mb/s, for easy connectivity and ultra-fast data transfers.

 

Native DDR2 1066 support 

This motherboard supports native DDR2 1066. It provides faster data 

transfer rate and more bandwidth to increase memory computing 

efficiency, enhancing system performance in 3D graphics and other 

memory demanding applications.

 

Serial ATA 3Gb/s technology and RAID support 

This motherboard supports hard drives based on the Serial ATA 

(SATA) 3Gb/s storage specifications. It allows RAID 0, RAID 1, RAID 

5, RAID 10, and JBOD configurations for Serial ATA drives.

Gigabit LAN solution 

The on-board LAN controller is a highly integrated Gb LAN controller. 

It is enhanced with an ACPI management function to provide efficient 

power management for advanced operating systems.

1-2

ASUS M2N68-AM

Summary of Contents for M2N68 AM - Motherboard - Micro ATX































































Reviews:

No comments