ASUS M2N-VM SE
2-37
Halt.On.[All,.But.Keyboard]
Allows you to error report type. Configuration options: [All Errors] [No Errors] [All,
But Keyboard] [All, But Diskette] [All, But Disk/Key]
Make sure that the above item is set to [Enabled] if you want to use the ASUS
MyLogo™2 feature.
OS.Select.for.DRAM.>.64MB.[Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating system with
an installed RAM of greater than 64 KB. Configuration options: [Non-OS2] [OS2]
Full.Screen.LOGO.[Enabled]
Allows you to enable or disable the full screen logo display feature. Configuration
options: [Disabled] [Enabled]
2.6.6.
Security
Select Menu
Item Specific Help
Boot Settings Configuration
Supervisor Password
Clear
User Password
Clear
Password Check
[Setup]
Phoenix-Award BIOS CMOS Setup Utility
Boot
Supervisor.Password. .
.
.
.
.
.
User.Password
These fields allow you to set passwords:
To set a password:
1. Select an item then press <Enter>.
2. Type in a password using a combination of a maximum of eight (8) alpha-
numeric characters, then press <Enter>.
3. When prompted, confirm the password by typing the exact characters again,
then press <Enter>. The password field setting is changed to Set.
Summary of Contents for M2N-VM SE HDMI
Page 1: ...Motherboard M2N VM SE ...
Page 92: ...2 44 Chapter 2 BIOS setup ...
Page 102: ...3 10 Chapter 3 Software support ...
