manualshive.com logo in svg

Asus M2N-MX SE PLUS, User Manual, Page: 71 / 90

Share
Download
Asus M2N-MX SE PLUS User Manual Download Page 71

ASUS M2N-MX SE PLUS

2-27

USB 1.1 Controller [Enabled]

Allows you to enable or disable the USB 1.1 Controller. 

Configuration options: [Enabled] [Disabled]

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 Controller.

 

Configuration options: [Enabled] [Disabled]

Legacy USB Support [Enabled]

Allows you to enable or disable support for USB devices on legacy operating 

systems (OS). Setting to Auto allows the system to detect the presence of USB 

devices at startup. If detected, the USB controller legacy mode is enabled. If no 

USB device is detected, the legacy USB support is disabled.  

Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full 

Speed (12 Mbps). Configuration options: [HiSpeed] [Full Speed]

The Module Version and USB Devices Enabled items show the  

auto-detected values. If no USB device is detected, the item shows None.

2.4.5 

USB Configuration

The items in this menu allows you to change the USB-related features. Select an 

item then press <Enter> to display the configuration options.

USB Configuration

Module Version - 2.24.0-11.4

USB Devices Enabled: 

 

 

         None

 

USB 1.1 Controller  

 [Enabled]

 

USB 2.0 Controller  

 [Enabled]

Legacy USB Support  

 [Enabled]

USB 2.0 Controller Mode 

 [HiSpeed]

 USB Mass Storage Device Configuration

IRQ-xx assigned to [PCI Device]

When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. 

When set to [Reserved], the IRQ is reserved for legacy ISA devices. 

 

Configuration options: [PCI Device] [Reserved]

Options

Enabled

 

Disabled

Summary of Contents for M2N-MX SE PLUS



























































































Reviews:

No comments