manualshive.com logo in svg

Asus M2A74-AM - Motherboard - Micro ATX, User Manual, Page: 32 / 58

Share
Download
Asus M2A74-AM - Motherboard - Micro ATX User Manual Download Page 32

•  For detailed instructions on RAID configurations, refer to the RAID manual in the 

Support DVD.

•  If you intend to create a Serial ATA RAID set using these connectors, set the 

OnChip 

SATA Type

 item in the BIOS to 

[RAID]

. See 

2.3.4 SATA Configuration

 for details.

3. 

Serial ATA connectors (7-pin SATA1, SATA2, SATA3 and SATA4)

These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk 

and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA 

1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the 

standard parallel ATA with 133MB/s (Ultra DMA133).

Install the Windows

®

 XP Service Pack 1 before using Serial ATA.

4. 

LPT connector (26-1 pin LPT)

 

The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT is 

standardized as IEEE 1284, which is the parallel port interface on IBM PC-compatible 

computers.

Chapter 1: Product introduction

1-22

Summary of Contents for M2A74-AM - Motherboard - Micro ATX



























































Reviews:

No comments