manualshive.com logo in svg

Asus KFN5-D - Motherboard - SSI EEB 3.51, User Manual, Page: 103 / 146

Share
Download
Asus KFN5-D - Motherboard - SSI EEB 3.51 User Manual Download Page 103

ASUS KFN5-D SLI 

4-37

4.6.2  Boot Settings Configuration

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) 

while booting to decrease the time needed to boot the system. When set 

to [Disabled], BIOS performs all the POST items. 

 

Configuration options: [Disabled] [Enabled]

Full Screen Logo [Disabled]

Allows you to enable or disable the full screen logo display feature. 

Configuration options: [Disabled] [Enabled]

Set this item to [Enabled] to use the ASUS MyLogo2™ feature.

Add On ROM Display Mode [Force BIOS]

Sets the display mode for option ROM.  

Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.  

Configuration options: [Off] [On]

PS/2 Mouse Support [Auto]

Allows you to enable or disable support for PS/2 mouse.  

Configuration options: [Disabled] [Enabled] [Auto]

Wait for ‘F1’ If Error [Enabled]

When set to Enabled, the system waits for the F1 key to be pressed when 

error occurs. Configuration options: [Disabled] [Enabled]

Hit ‘DEL’ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run 

Setup” during POST. Configuration options: [Disabled] [Enabled]

     Select Screen

     Select Item

+-   Change Option

F1   General Help

F10  Save and Exit

ESC  Exit

Boot Settings Configuration
Quick Boot  

 

[Enabled]

Full Screen Logo 

 

[Disabled]

AddOn ROM Display Mode 

 

[Force BIOS]

Bootup Num-Lock 

 

[On]

PS/2 Mouse Support 

 

[Auto]

Wait For ‘F1’ If Error 

 

[Enabled]

Hit ‘DEL’ Message Display  

[Enabled]

Interrupt 19 Capture 

 

[Disabled]

Allows BIOS to skip 

certain tests while 

booting. This will 

decrease the time 

needed to boot the 

system.

Summary of Contents for KFN5-D - Motherboard - SSI EEB 3.51



















































































































































Reviews:

No comments