manualshive.com logo in svg

Asus KCMR-D12, User Manual, Page: 87 / 144

Share
Download
Asus KCMR-D12 User Manual Download Page 87

ASUS KCMR-D12

4-29

4.6 

Power menu

v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.

BIOS SETUP UTILITY

Main 

   

Advanced    Server

 

    

Power

    Boot    Tools    Exit   

Suspend Mode 

 

  [Auto]

Repost Video on S3 Resume  

  [No]

ACPI 2.0 Support 

 

  [ACPI v2.0]

ACPI APIC support 

 

  [Enabled]

  APM Configuration

  Hardware Monitor

←→

  Select Screen 

↑↓

   Select Item 

+-   Change Option 

F1   General Help 

F10  Save and Exit 

ESC  Exit

Select the ACPI state 

used for System 

Suspend.

4.6.1 

Suspend Mode [Auto]

Allows you to select the ACPI state used for system suspend. 
Configuration options: [S1 (POS) only] [S3 only] [Auto]

4.6.2 

Repost Video on S3 Resume [No]

Allows you to determine whether to incoke VGA BIOS post on S3/STR resume. 
Configuration options: [No] [Yes]

4.6.3 

ACPI 2.0 Support [ACPI v2.0]

Specifies the Advanced Configuration and Power Interface (ACPI) version 
supported. Configuration options: [ACPI v1.0] [ACPI v2.0] [ACPI v3.0]

4.6.4 

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface 
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When 
set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list. 
Configuration options: [Disabled] [Enabled]

Summary of Contents for KCMR-D12

















































































































































Reviews:

No comments