manualshive.com logo in svg

Asus K7M - Motherboard - ATX, User Manual, Page: 29 / 96

Share
Download
Asus K7M - Motherboard - ATX User Manual Download Page 29

ASUS K7M User’s Manual

29

3. HARDWARE SETUP

CPU

3. H/W SETUP

3.6.5 Recommended Heatsinks for Slot A Processors

The recommended heatsinks for the Slot A processors are those with three-pin fans,
such as the ASUS Smart Fan, that can be connected to the motherboard’s CPU fan
connector. These heatsinks dissipate heat more efficiently and with an optional hard-
ware monitor, they can monitor the fan’s RPM and use the alert function with the
Intel LANDesk Client Manager (LDCM) or the ASUS PC Probe software.

SECC Heatsink & Fan

WARNING!

 Do not insert the sensor between the processor and heatsink, other-

wise, it will cause damage to the P2T-Cable.

IMPORTANT! Accurate readings are guaranteed only for the ASUS Smart Fan.

2. Connect the P2T-Cable to the CPU thermal sensor connector (TRCPU).

01

01

01

K7M

K7M Thermal Sensor Connectors

TRCPU

TRPWR

Thermal Sensor for CPU

Thermal Sensor for Power Supply

NOTE: If you have a power supply with thermal monitoring, connect its ther-
mal sensor cable to TRPWR.

Summary of Contents for K7M - Motherboard - ATX

































































































Reviews:

No comments