Asus J3455I-CM-A, Manual

Page: 45 / 54

J3455I-CM-A
3-18
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you
to select a desired post report waiting time. Configuration options: [1 sec] ~ [10 sec] [Until
Press ESC].
3.6.3 Bootup NumLock State [On]
[On] Sets the power-on state of the NumLock to [On].
[Off] Sets the power-on state of the NumLock to [Off].
3.6.4 Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
3.6.5 CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM [Enabled]
[Auto] The system automatically detects the bootable devices and the add-on
devices.
[Enabled] For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows ® UEFI mode.
[Disabled] Disable the CSM to fully support the Windows
®
Security Update and
Security Boot.
The following four items appear when you set Launch CSM to [Enabled].
Boot Devices Control [UEFI and L...]
Allows you to select the type of devices that you want to boot up. Configuration options:
[UEFI and Legacy OPROM] [Legacy OPROM only] [UEFI only]
Boot from Network Devices [Legacy OPR...]
Allows you to select the type of network devices that you want to launch. Configuration
options: [Legacy OPROM first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OPR...]
Allows you to select the type of storage devices that you want to launch. Configuration
options: [Both, Legacy OPROM first] [Both, UEFI first] [Legacy OPROM first] [UEFI driver
first] [Ignore]
Boot from PCI-E Expansion Devices [Legacy OPR...]
Allows you to select the type of PCIe/PCI expansion devices that you want to launch.
Configuration options: [Legacy OPROM first] [UEFI driver first]