Asus INTEL TUSL2-M User Manual Download Page 47

Page: 47 / 104

ASUS TUSL2-M User’s Manual

4. BIOS SETUP

4. BIOS SETUP

Updating BIOS

4.1.2 Updating BIOS Procedures

1. Download an updated ASUS BIOS file from the Internet (WWW or

FTP) (see ASUS CONTACT INFORMATION on page 3 for details)
and save to the boot floppy disk you created earlier.

2. Boot from the floppy disk.
3. At the “A:\” prompt, type AFLASH and then press <Enter>.
4. At the Main Menu, type 2 then press <Enter>. The Update BIOS

Including Boot Block and ESCD screen appears.

5. Type the filename of your new BIOS and the path, for example, A:\XXX-

XX.XXX, then press <Enter>.
NOTE: To cancel this operation, press <Enter>.

6. When prompted to confirm the BIOS update, press Y to start the update.

WARNING!

Update the BIOS only if you have problems with the motherboard

and you know that the new BIOS revision will solve your problems. Careless
updating can result in your motherboard having more problems!

Summary of Contents for INTEL TUSL2-M









































































































Search results

Summary of Contents for INTEL TUSL2-M

Reviews:

Related manuals for INTEL TUSL2-M

Brands by name

Popular brands

Asus INTEL TUSL2-M, User Manual

Search results

Summary of Contents for INTEL TUSL2-M

Reviews:

Related manuals for INTEL TUSL2-M

Brands by name

Popular brands