1-8
Chapter 1: Product introduction
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section
2.5 Ai Tweaker menu
for manual memory
frequency adjustment.
• Always install the DIMMs with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
Visit the ASUS website at www.asus.com for the latest QVL.
1.4.3
Installing a DIMM
1
2
3
Summary of Contents for H110M-PLUS D3
Page 1: ...Motherboard H110M PLUS D3 ...
Page 10: ...x ...
Page 32: ...1 22 Chapter 1 Product introduction ...
