ASUS H110M-C
1-11
1.7 Connectors
1.7.1
Rear panel connectors
5 6
4
7
8
1
11
9
3
2
10
1.
PS/2 mouse port (green).
This port is for a PS/2 mouse.
2.
Serial port.
This 9-pin COM port is for pointing devices or other serial devices.
3.
Video Graphics Adapter (VGA) port.
This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
4.
LAN (RJ-45) port.
This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
2.
Chassis intrusion header (4-1 pin CHASSIS)
This header is for a chassis-mounted intrusion detection sensor or switch. Connect one
end of the chassis intrusion sensor or switch cable to this header. The chassis intrusion
sensor or switch sends a high-level signal to this header when a chassis component is
removed or replaced. The signal is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
H110M-C
H110M-C Chassis intrusion connector
+5VSB_MB
Chassis Signal GND
CHASSIS
