Asus F2A55-M LK2 PLUS, User Manual, Page: 36 / 76

3. Serial ATA 3.0 Gb/s connectors (7-pin SATA3G 1~4)
These connectors are for the Serial ATA 3.0 Gb/s signal cables for Serial ATA hard
disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can
create a RAID 0, RAID 1, or RAID 10 configuration through the onboard controller.
• These connectors are set to AHCI mode by default. If you intend to create a Serial ATA
RAID set using these connectors, set the type of the SATA connectors in the BIOS to
[RAID] . See section 2.5.2 SATA Configuration for details.
• You must install Windows
®
XP Service Pack 3 or later version before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows
®
XP SP3 or later version.
• When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI] . See section 2.5.2 SATA Configuration for details.
GND
RSATA_RXP1 RSATA_RXN1
GND
RSATA_TXN1 RSATA_TXP1
GND
SATA3G_1
GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXN2 RSATA_RXP2 GND
SATA3G_2
GND RSATA_TXP4 RSATA_TXN4 GND RSATA_RXN4 RSATA_RXP4 GND
SATA3G_4
GND RSATA_TXP3 RSATA_TXN3 GND RSATA_RXN3 RSATA_RXP3 GND
SATA3G_3
F2A55-M LK2 PLUS
F2A55-M LK2 PLUS SATA 3.0Gb/s connectors
Chapter 1: Product introduction
1-24