manualshive.com logo in svg

Asus F1A55 R2.0, User Manual, Page: 64 / 76

Share
Download
Asus F1A55 R2.0 User Manual Download Page 64

2-20

Chapter 2: Getting started

Realtek LAN Controller [Enabled]

[Enabled] 

Enables the Realtek LAN controller.

[Disabled] 

Disables the controller.

Realtek PXE OPROM [Disabled]

This item appears only when you set the previous item to [Enabled] and allows you to enable 

or disable the PXE OptionRom of the Realtek LAN controller.

Configuration options: [Enabled] [Disabled]

Asmedia USB 3.0 Controller [Enabled]

[Enabled] 

Enables the onboard USB 3.0 controller.

[Disabled] 

Disables the controller.

Asmedia USB 3.0 Battery Charging Support [Disabled]

This item appears only when the Asmedia USB 3.0 Controller item is set to [Enabled].
[Enabled] 

Enables the Asmedia USB 3.0 battery charging function.

[Disabled] 

Disables this function

Serial Port Configuration

The sub-items in this menu allow you to set the serial port configuration.

Serial Port [Enabled]

Allows you to enable or disable the serial port (COM).

Configuration options: [Enabled] [Disabled]

Change Settings [Auto]

Allows you to select the Serial Port base address. 

Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] 

[IO=2E8h; IRQ=3]

2.5.6 

APM

Power On By PS/2 Keyboard [Disabled]

[Disabled] 

Disables the Power On by a PS/2 keyboard.

[Space Bar] 

Sets the Space Bar on the PS/2 keyboard to turn on the system.

[Ctrl-Esc] 

Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system. 

[Power Key] 

Sets Power key on the PS/2 keyboard to turn on the system. This feature 

requires an ATX power supply that provides at least 1A on the +5VSB lead.

Restore AC Power Loss [Power Off]

[Power On] 

The system goes into on state after an AC power loss.

[Power Off] 

The system goes into off state after an AC power loss.

[Last State] 

The system goes into either off or on state, whatever the system state was 

before the AC power loss.

Summary of Contents for F1A55 R2.0













































































Reviews:

No comments