English
29
All-in-one PC ET2700 Series
1. For machine ventilation, be sure to leave a distance of at least 6cm between the All-in-one
PC and the wall.
2. The wall mount kit should comply with VESA standards.
3. To ensure safety, please read the wall mount kit installation manual carefully before
mounting your All-in-one PC to the wall.
4. At least two persons are required to install or remove the All-in-one PC onto and from the
wall to avoid hazard of falling objects and breakage. Qualified personnel is recommended.
5. The wall should be able to sustain four times the weight of the All-in-on PC and wall mount
components combined (40kg at least). The mounting location must be able to withstand
earthquake or other impacts. Cement or masonry walls recommended.
6. By following the instructions in the
installation manual that came with your
wall mount kit (VESA200), fasten the wall
mount bracket to the wall using the four
screws (M4 x 10L) provided in the kit.
Upright your All-in-one PC and hook it on
to the wall by sliding the grooves of the
wall mount pad into the bracket .
The wall mount kit in this illustration is for
reference only.
