Asus ET2221A User Manual Download

Page: 55 / 58

English

All-in-One PC ET22 Series

NO DISASSEMBLY

The warranty does not apply to the products that

have been disassembled by users

Lithium-Ion Battery Warning

CAUTION

: Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic

equipment, and mercury-containing button cell battery) should not be placed in municipal waste.

Check local regulations for disposal of electronic products.

DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin

indicates that the battery should not be placed in municipal waste.

No Exposure to Liquids

DO NOT expose to or use near liquids, rain, or moisture. This product is not

waterproof or oil-proof.

CE marking for devices with wireless LAN/ Bluetooth

This equipment complies with the requirements of Directive 1999/5/EC of the European

Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications

Equipment and mutual recognition of conformity.

is for class II device

Wireless Operation Channel for Different Domains

N. America

2.412-2.462 GHz

Ch01 through CH11

Japan

2.412-2.484 GHz

Ch01 through Ch14

Europe ETSI

2.412-2.472 GHz

Ch01 through Ch13

Summary of Contents for ET2221A



























































Search results

Summary of Contents for ET2221A

Reviews:

Related manuals for ET2221A

Brands by name

Popular brands

Asus ET2221A, User Manual

Search results

Summary of Contents for ET2221A

Reviews:

Related manuals for ET2221A

Brands by name

Popular brands