Asus ESC700 G4, User Manual

Page: 109 / 130

ASUS ESC700 G4 5-7
5.1.4 Intel
®
Virtual Raid on CPU in UEFI BIOS
This feature requires a KEY module to enable CPU RAID functions with Intel
®
CPU RSTe.
• The KEY module is purchased separately.
• The HYPER M.2 X16 Card is purchased separately.
• Due to CPU behavior, CPU RAID functions with Intel ® CPU RSTe only supports Intel ®
Skylake-W Series Processors (6-core or above) and Intel
®
SSD modules.
• Refer to section 3.5 Internal connectors for the location of the VROC_HW_KEY
connector.
Due to hardware design, your motherboard does not support CPU RAID configurations as
OS drives.
To enter the Intel
®
Virtual Raid on CPU in UEFI BIOS:
1. Enter the BIOS Setup during POST.
2. Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM , then
set the item to
[Disabled]
.
3. Go to the
Advanced
menu
> CPU Storage Configuration
, then set the PCIE slot(s)
that you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to Hyper
M.2 X16 or PCIE X4 SSD Card correspondingly.
4. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
5. Go to the Advanced menu > Intel(R) Virtual Raid on CPU > All Intel VMD
Controllers
, then press <Enter> to display the Intel
®
Virtual Raid on CPU menu.
Refer to Chapter 4 for details on entering and navigating through the BIOS Setup.