5-40
Chapter 5: RAID configuration
8.
When you are finished, you will see the following screen in
Volumes
field and you can
change related items in the
Volume Properties
field.
5.4.2
Change Volume Type
When you are finished to create a RAID set, you can view or change related items in the
Volume Properties
field.
To change the type in
Volume Properties
:
1.
Click the SAS array items you want to change in
Volumes
field.
2
From the
Volume Properties
field, select
Type:RAID 1 Change type
.
3.
You can change the
Name
,
Select the new volume type
, and
Select additional disks
to include in the new volume
if needed.
4.
Then select the
Data stripe size
for the RAID array (for RAID 0, 10 and 5 only),
and then click
OK
. The available stripe size values range from 4 KB to 128 KB. The
following are typical values:
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB
Summary of Contents for ESC2000
