Asus EBS-I10, User Manual

Page: 33 / 59

EBS-I10 33
M.2
Configuration options: [Disabled] [Enabled]
MSATA_MPCIE
Configuration options: [Disabled] [Enabled]
3.3.11 USB Configuration
Legacy USB Support
[Enabled] Enables the support for USB devices on legacy OS.
[Disabled] USB devices are only available when running BIOS Setup.
[Auto]
Allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If
no USB device is detected, the legacy USB support is disabled.
XHCI Hand-off
This item functions as a workaround for OSes without XHCI hand-off
support. The XHCI ownership change should be claimed by XHCI driver.
Configuration options: [Enabled] [Disabled]
USB Mass Storage Driver Support
Allows you to enable or disable USB Mass Storage Driver Support.
Configuration options: [Disabled] [Enabled]
LAN1_U31G1_E1
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS. Configuration
options: [Disabled] [Enabled]
LAN1_U31G1_E2
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
LAN2_U31G1_E3
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]