Asus E420, User Manual, Page: 21 / 44

E420
21
Quickly enter the BIOS
To quickly enter the BIOS:
• Press the power button for at least four (4) seconds to shut down
your PC, then insert a straightened paper clip into the BIOS key
slot, and press the power button again to turn your PC back on
and enter BIOS.
NOTE:
POST (Power-On Self Test) is a series of software controlled
diagnostic tests that run when you turn on your PC.
Load default BIOS settings
To load the default values for each of the parameters in your BIOS:
• Enter the BIOS by following the steps mentioned in the Quickly
enter the BIOS section.
• Navigate to the
Exit
menu.
• Select the
Load Optimized Defaults
option, or you may press
<F5>.
• Select
Yes
to load the default BIOS values.